Repeater and Test code for ESP Now

examples/Receiver/platformio.ini

@@ -0,0 +1,48 @@
+[env:esp32dev]
+platform = espressif32
+board = esp32dev
+framework = arduino
+monitor_speed = 115200
+monitor_filters = esp32_exception_decoder
+
+[env:esp32-s3]
+platform = espressif32
+board = esp32-s3-devkitc-1
+framework = arduino
+monitor_speed = 115200
+monitor_filters = esp32_exception_decoder
+build_flags =
+    -D ARDUINO_USB_MODE=1
+    -D ARDUINO_USB_CDC_ON_BOOT=1
+
+[env:m5stick]
+platform = espressif32
+board = m5stick-c
+framework = arduino
+board_build.mcu = esp32
+board_build.f_cpu = 240000000L
+board_build.partitions = no_ota.csv
+monitor_speed = 115200
+monitor_filters = esp32_exception_decoder
+build_flags =
+    -Os
+lib_deps =
+    M5StickC
+
+[env:esp32-c3]
+platform = espressif32
+framework = arduino
+board = esp32-c3-devkitm-1
+board_build.mcu = esp32c3
+board_build.f_cpu = 160000000L
+board_build.flash_mode = dio
+board_build.partitions = default.csv
+monitor_speed = 115200
+monitor_filters = time, default, esp32_exception_decoder
+upload_speed = 921600
+build_flags =
+    -Os
+    -D ARDUINO_ESP32C3_DEV
+    -D CONFIG_IDF_TARGET_ESP32C3
+    -D ARDUINO_USB_MODE=1
+    -D ARDUINO_USB_CDC_ON_BOOT=1

examples/Receiver/src/main.cpp

@@ -0,0 +1,107 @@
+/**
+ * VictronBLE ESPNow Receiver
+ *
+ * Standalone receiver for data sent by the Repeater example.
+ * Does NOT depend on VictronBLE library - just ESPNow.
+ *
+ * Flash this on a second ESP32 and it will print Solar Charger
+ * data received over ESPNow from the Repeater.
+ */
+
+#include <Arduino.h>
+#include <WiFi.h>
+#include <esp_now.h>
+
+// ESPNow packet structure - must match Repeater
+struct __attribute__((packed)) SolarChargerPacket {
+    uint8_t chargeState;
+    float batteryVoltage;     // V
+    float batteryCurrent;     // A
+    float panelVoltage;       // V
+    float panelPower;         // W
+    uint16_t yieldToday;      // Wh
+    float loadCurrent;        // A
+    int8_t rssi;              // BLE RSSI
+    char deviceName[16];      // Null-terminated, truncated
+};
+
+static uint32_t recvCount = 0;
+
+static const char* chargeStateName(uint8_t state) {
+    switch (state) {
+        case 0:   return "Off";
+        case 1:   return "Low Power";
+        case 2:   return "Fault";
+        case 3:   return "Bulk";
+        case 4:   return "Absorption";
+        case 5:   return "Float";
+        case 6:   return "Storage";
+        case 7:   return "Equalize";
+        case 9:   return "Inverting";
+        case 11:  return "Power Supply";
+        case 252: return "External Control";
+        default:  return "Unknown";
+    }
+}
+
+void onDataRecv(const uint8_t* senderMac, const uint8_t* data, int len) {
+    if (len != sizeof(SolarChargerPacket)) {
+        Serial.println("Unexpected packet size: " + String(len));
+        return;
+    }
+
+    const auto* pkt = reinterpret_cast<const SolarChargerPacket*>(data);
+    recvCount++;
+
+    // Ensure device name is null-terminated even if corrupted
+    char name[17];
+    memcpy(name, pkt->deviceName, 16);
+    name[16] = '\0';
+
+    Serial.printf("[RX #%lu] %s | State:%s Batt:%.2fV %.2fA PV:%.1fV %.0fW Yield:%uWh",
+                  recvCount,
+                  name,
+                  chargeStateName(pkt->chargeState),
+                  pkt->batteryVoltage,
+                  pkt->batteryCurrent,
+                  pkt->panelVoltage,
+                  pkt->panelPower,
+                  pkt->yieldToday);
+
+    if (pkt->loadCurrent > 0) {
+        Serial.printf(" Load:%.2fA", pkt->loadCurrent);
+    }
+
+    Serial.printf(" RSSI:%ddBm From:%02X:%02X:%02X:%02X:%02X:%02X\n",
+                  pkt->rssi,
+                  senderMac[0], senderMac[1], senderMac[2],
+                  senderMac[3], senderMac[4], senderMac[5]);
+}
+
+void setup() {
+    Serial.begin(115200);
+    delay(1000);
+
+    Serial.println("\n=== VictronBLE ESPNow Receiver ===\n");
+
+    // Init WiFi in STA mode (required for ESPNow)
+    WiFi.mode(WIFI_STA);
+    WiFi.disconnect();
+
+    Serial.println("MAC: " + WiFi.macAddress());
+
+    // Init ESPNow
+    if (esp_now_init() != ESP_OK) {
+        Serial.println("ERROR: ESPNow init failed!");
+        while (1) delay(1000);
+    }
+
+    esp_now_register_recv_cb(onDataRecv);
+
+    Serial.println("ESPNow initialized, waiting for packets...");
+    Serial.println("Expecting " + String(sizeof(SolarChargerPacket)) + " byte packets\n");
+}
+
+void loop() {
+    delay(100);
+}