Attempt at building a platformio version before starting on changes to testing

2026-06-07 17:57:42 +10:00
parent 95bc2ae9fe
commit 13881ae6c6
15 changed files with 2382 additions and 1 deletions
@@ -0,0 +1,82 @@
+; SPDX-License-Identifier: Apache-2.0
+; Copyright (c) 2012-2024 Scott Penrose <scottp@dd.com.au> and WII5 Buoy contributors
+;
+; PlatformIO build configuration for the WII5 Buoy firmware.
+; This sits alongside the existing arduino-cli flow (tools/build_local.sh);
+; both can build the same sources, which stay in place at the repo root.
+;
+; Usage:
+;   pio run -e wii5_buoy                         # compile
+;   pio run -e wii5_buoy -t upload               # compile + flash
+;   pio device monitor -e wii5_buoy              # serial console @ 230400
+;
+; See platformio.org for the full reference.
+
+[platformio]
+; Sources live at the repo root, not in a src/ dir. Compile them in place.
+src_dir = .
+
+[env:wii5_buoy]
+platform = atmelavr
+framework = arduino
+
+; Custom board: ATmega2560, 3V3, 11.0592 MHz crystal, serial bootloader @ 230400.
+; Definition lives in boards/wii5_v2_2560.json (auto-discovered).
+board = wii5_v2_2560
+
+; Upload over the Arduino serial bootloader (avrdude -c arduino).
+upload_protocol = arduino
+upload_speed = 230400
+; upload_port = /dev/ttyUSB0   ; uncomment / override, or rely on auto-detect
+monitor_speed = 230400
+
+; Compile the firmware sources at the repo root. The "*.cpp" glob is
+; non-recursive, so it matches only the root-level WII5*.cpp plus pio_main.cpp
+; (the entry shim) and naturally excludes app/, test/, tools/ and doc/.
+; The entry sketch (app/wii5_buoy/wii5_buoy.ino) is pulled in by pio_main.cpp.
+build_src_filter =
+    +<*.cpp>
+
+; The project's own headers are included with angle brackets (<WII5.h>, ...),
+; so the repo root must be on the include path. Software version/commit are
+; normally injected by tools/build_local.sh; default them here.
+build_flags =
+    -I.
+    ; Board-variant macros that the arduino-cli custom board (WII:avr) injected:
+    -D__WII5_V02__            ; selects WII5_board_v2.h in WII5_board.h
+    -DF_CPU_11               ; 11.0592 MHz timing -> 230400 console / 115200 IMU baud
+    ; Older Arduino AVR cores exposed NUM_PINS; current cores use NUM_DIGITAL_PINS.
+    -DNUM_PINS=NUM_DIGITAL_PINS
+    -DWII5_SOFTWARE_VERSION=\"WII5Buoy_dev\"
+    -DWII5_SOFTWARE_COMMIT=\"dev\"
+
+; Public libraries pulled from the PlatformIO registry. Scott's own libraries
+; (AvgStd, PushButton, MemoryFree, SDBlock) are vendored under lib/ instead.
+lib_deps =
+    paulstoffregen/Time
+    mikalhart/TinyGPSPlus
+    milesburton/DallasTemperature
+    paulstoffregen/OneWire
+    pfeerick/elapsedMillis
+    rocketscream/Low-Power
+    sparkfun/IridiumSBDi2c
+    thijse/EEPROMEx
+    bakercp/CRC32
+    arduino-libraries/SD
+    adafruit/RTClib
+
+; LoRa-enabled variant (experimental). This path additionally depends on the
+; Sh3dNode networking stack (sh3dNodeNetwork / SH3D_NODE_Packet_* / RH_RF95),
+; which is NOT bundled in this repository, so the env does not build as-is.
+; RadioHead is also GPLv2 (dual-licensed); binaries built from it inherit GPLv2
+; terms. Enable once the Sh3dNode library is available, e.g.:
+;
+; [env:wii5_buoy_lora]
+; extends = env:wii5_buoy
+; build_flags =
+;     ${env:wii5_buoy.build_flags}
+;     -DWII5_RADIO_LORA
+; lib_deps =
+;     ${env:wii5_buoy.lib_deps}
+;     mikem/RadioHead
+;     <path-or-url-to-Sh3dNode-library>