Cleanup only

examples/MultiDevice/src/main.cpp

@@ -143,7 +143,7 @@ MyVictronCallback callback;
 
 void setup() {
     Serial.begin(115200);
-    delay(2000);
+    delay(1000);
 
     Serial.println("\n\n=================================");
     Serial.println("VictronBLE Multi-Device Example");
@@ -155,14 +155,12 @@ void setup() {
         Serial.println(victron.getLastError());
         while (1) delay(1000);
     }
-    delay(1000);
 
     // Enable debug output (optional)
     victron.setDebug(true);
 
     // Set callback for data updates
     victron.setCallback(&callback);
-    delay(1000);
 
     // Add your devices here
     // Replace with your actual MAC addresses and encryption keys
@@ -189,7 +187,6 @@ void setup() {
         "0ec3adf7433dd61793ff2f3b8ad32ed8",         // Encryption key (32 hex chars)
         DEVICE_TYPE_SOLAR_CHARGER                    // Device type
     );
-    delay(1000);
 
     /*
      *
@@ -209,41 +206,47 @@ void setup() {
      */
 
     // Example: Solar Charger #1
+    /*
     victron.addDevice(
         "MPPT 100/30",                              // Device name
         "E7:48:D4:28:B7:9C",                        // MAC address
         "0df4d0395b7d1a876c0c33ecb9e70dcd",         // Encryption key (32 hex chars)
         DEVICE_TYPE_SOLAR_CHARGER                    // Device type
     );
+    */
 
     // Example: Solar Charger #2
+    /*
     victron.addDevice(
         "MPPT 75/15",
         "AA:BB:CC:DD:EE:FF",
         "1234567890abcdef1234567890abcdef",
         DEVICE_TYPE_SOLAR_CHARGER
     );
+    */
 
     // Example: Battery Monitor (SmartShunt)
+    /*
     victron.addDevice(
         "SmartShunt",
         "11:22:33:44:55:66",
         "fedcba0987654321fedcba0987654321",
         DEVICE_TYPE_BATTERY_MONITOR
     );
+    */
 
     // Example: Inverter/Charger
+    /*
     victron.addDevice(
         "MultiPlus",
         "99:88:77:66:55:44",
         "abcdefabcdefabcdefabcdefabcdefab",
         DEVICE_TYPE_INVERTER
     );
+    */
 
-    delay(1000);
     Serial.println("Configured " + String(victron.getDeviceCount()) + " devices");
     Serial.println("\nStarting BLE scan...\n");
-    delay(1000);
 }
 
 void loop() {

src/VictronBLE.cpp

@@ -471,8 +471,8 @@ bool VictronBLE::parseBatteryMonitor(const uint8_t* data, size_t len, BatteryMon
 
     // Parse battery current (22-bit signed, 1 mA units)
     // Bits 0-7: currentLow, Bits 8-15: currentMid, Bits 16-21: low 6 bits of currentHigh_consumedLow
-    int32_t current = payload->currentLow | 
-                     (payload->currentMid << 8) | 
+    int32_t current = payload->currentLow |
+                     (payload->currentMid << 8) |
                      ((payload->currentHigh_consumedLow & 0x3F) << 16);
     // Sign extend from 22 bits to 32 bits
     if (current & 0x200000) {
@@ -482,8 +482,8 @@ bool VictronBLE::parseBatteryMonitor(const uint8_t* data, size_t len, BatteryMon
 
     // Parse consumed Ah (18-bit signed, 10 mAh units)
     // Bits 0-1: high 2 bits of currentHigh_consumedLow, Bits 2-9: consumedMid, Bits 10-17: consumedHigh
-    int32_t consumedAh = ((payload->currentHigh_consumedLow & 0xC0) >> 6) | 
-                        (payload->consumedMid << 2) | 
+    int32_t consumedAh = ((payload->currentHigh_consumedLow & 0xC0) >> 6) |
+                        (payload->consumedMid << 2) |
                         (payload->consumedHigh << 10);
     // Sign extend from 18 bits to 32 bits
     if (consumedAh & 0x20000) {
@@ -520,8 +520,8 @@ bool VictronBLE::parseInverter(const uint8_t* data, size_t len, InverterData& re
     result.batteryCurrent = payload->batteryCurrent * 0.01f;
 
     // Parse AC Power (signed 24-bit, 1 W units)
-    int32_t acPower = payload->acPowerLow | 
-                     (payload->acPowerMid << 8) | 
+    int32_t acPower = payload->acPowerLow |
+                     (payload->acPowerMid << 8) |
                      (payload->acPowerHigh << 16);
     // Sign extend from 24 bits to 32 bits
     if (acPower & 0x800000) {
@@ -698,6 +698,7 @@ void VictronBLE::debugPrint(const String& message) {
     }
 }
 
+// XXX Can't we use debugPrintf instead for hex struct etc?
 void VictronBLE::debugPrintHex(const char* label, const uint8_t* data, size_t len) {
     if (!debugEnabled) return;