scottp
97affae86c
The README says who wrote it and the two projects it was built for, WII6 and OGLAS, with their sites; credits Ground Control for the modem and the library that does the protocol work; and gives the licence with contact details, where to report issues and what helps in a report, and that it is not a Ground Control product. The licence, every source file and the Python package's metadata carry the copyright and email; the package lists its homepage, repository, issues and changelog.
54 lines
1.5 KiB
YAML
54 lines
1.5 KiB
YAML
# SPDX-License-Identifier: MIT
|
|
# Copyright (c) 2026 Scott Penrose <scottp@dd.com.au>
|
|
|
|
description: |
|
|
RockBLOCK 9704, Ground Control's Iridium Certus (IMT) modem board, on a
|
|
UART. The modem speaks JSPR, JSON lines over a fixed 230400 8N1; there is
|
|
no AT mode. One per system: the library underneath keeps global state.
|
|
|
|
The control pins are optional. With none, the modem is assumed powered and
|
|
enabled, which is how the board behaves with the pins left open.
|
|
|
|
compatible: "rock7,rockblock-9704"
|
|
|
|
include:
|
|
- uart-device.yaml
|
|
|
|
properties:
|
|
power-gpios:
|
|
type: phandle-array
|
|
description: |
|
|
P_EN, the supply enable. Driven active to power the board.
|
|
|
|
iridium-enable-gpios:
|
|
type: phandle-array
|
|
description: |
|
|
I_EN, the modem enable. Driven active once the supply is up.
|
|
|
|
booted-gpios:
|
|
type: phandle-array
|
|
description: |
|
|
I_BTD, the modem's booted signal. When present, power-up waits for it
|
|
instead of a fixed delay.
|
|
|
|
boot-delay-ms:
|
|
type: int
|
|
default: 4000
|
|
description: |
|
|
How long to wait after enabling the modem before talking to it, when
|
|
there is no booted-gpios to wait on.
|
|
|
|
examples:
|
|
- |
|
|
&usart3 {
|
|
current-speed = <230400>;
|
|
status = "okay";
|
|
|
|
modem: rockblock {
|
|
compatible = "rock7,rockblock-9704";
|
|
power-gpios = <&gpiob 0 GPIO_ACTIVE_HIGH>;
|
|
iridium-enable-gpios = <&gpiob 1 GPIO_ACTIVE_HIGH>;
|
|
booted-gpios = <&gpiob 2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|